Test report No 381211/13975/CPR dated 25 March 2021 Page 2 of 3 Descri tion of item* The item under examination consists of No 3 specimens of decorative laminated glasses, having the dimensional characteristics stated in the following table: nominal width 900 mm nominal height 1100 mm nominal thickness 8,76 mm More specifically, the item consists of: – glass float layer, nominal thickness 4 mm; – No 2 layers of EVA, total nominal thickness 0,76 mm; – glass float layer, nominal thickness 4 mm Manufacturing site*. Sicis S r l - Via Canala, 75/79 - 48123 Ravenna (RA) - Italy Normative references Standard Title UNI EN 14449:2005 Vetro per edilizia - Vetro stratificato e vetro stratificato di sicurezza - Valutazione della conformità/Norma di prodotto (Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard) EC 1-2008 UNI EN 14449:2005 // UNI EN 356:2002 Vetro per edilizia - Vetro di sicurezza - Prove e classificazione di resistenza contro l’attacco manuale (Glass in building - Security glazing - Testing and classification of resistance against manual attack) A aratus Descri tion In-house identification code specimen support equipment // steel ball with a diameter of 100 mm and a mass of 4 11 kg // impact body support equipment // Method Prior to testing, the item was subjected to ambient laboratory conditions for 24 h The test was carried out in accordance with the requirements of clause 8 “Metodo di prova per la prova di caduta di un corpo duro” ( Test method for drop test”) of standard UNI EN 356:2002 The item was tested for category of resistance “P2A” (*) according to that stated by the customer; Istituto Giordano declines all responsibility for the information and data provided by the customer that may influence the results
RkJQdWJsaXNoZXIy MTk5ODk1