SICIS Vetrite Certificates ISO UNI EN Standards

Rapporto di prova n. 384176/14238/CPR del 23 giugno 2021 Test report No. 84176/142 8/CPR dated 2 June 2021 Pagina 6 di 10 Page 6 of 10 Risultati Results Parametri* Parameter* Provetta n. Specimen No. Media Mean 1 2 3 FIGR 0,2 MJ [W/s] 20 15 22 19 FIGR 0,4 MJ [W/s] 20 12 22 18 LFS < estremità della provetta LFS < edge of specimen [Sì/No] [Yes/No] Sì Yes Sì Yes Sì Yes // THR600s [MJ] 1,7 1,4 2 1,7 SMOGR [m²/s²] 0 0 0 0 TSP600s [m²] 12 4 9 8 DROP t ≤ 10 s [Sì/No] [Yes/No] No No No No No No // DROP t > 10 s [Sì/No] [Yes/No] No No No No No No // (*) FIGRA0,2 MJ = indice di velocità di crescita del fuoco (THR = 0,2 MJ) / fire growth rate index (THR = 0,2 MJ). FIGRA0,4 MJ = indice di velocità di crescita del fuoco (THR = 0,4 MJ) / fire growth rate index (THR = 0,4 MJ). LFS = spargimento laterale delle fiamme sull’ala lunga della provetta / lateral flame spread on the long wing of the specimen. THR600s = calore rilasciato dalla provetta nei primi 600 s di prova / total heat release from specimen within the first 600 s of the test. SMOGRA = indice di velocità di crescita del fumo / smoke growth rate. TSP600s = produzione totale di fumo della provetta nei primi 600 s di prova / total smoke production of specimen within the first 600 s of the test. DROP t ≤ 10 s = gocce/particelle ardenti di durata non superiore a 10 s nei primi 600 s di prova / flaming droplets/particles lasting not more than 10 s within the first 600 s of the test. DROP t > 10 s = gocce/particelle ardenti di durata superiore a 10 s nei primi 600 s di prova / flaming droplets/particles lasting more than 10 s within the first 600 s of the test. Nota: i risultati di prova sono collegati al comportamento delle provette di un prodotto nelle particolari condizioni di prova; non sono da intendersi come l’unico criterio per la valutazione del potenziale rischio di incendio del prodotto nel suo impiego. Note: the test results relate to the behaviour of the test specimens of a product under the particular conditions of the test; they are not intended to be the sole criterion for assessing the potential fire hazard of the product in use.

RkJQdWJsaXNoZXIy MTk5ODk1